Condux Deluxe Blower - Manual (Page 35)

35
B. REmOVE CABLE FROm BLOwER.
1. Open Air Block Cover and remove Cable Seals (Figure 75).
2. Pull the Guide Roller knob and move Rear Guide Roller into open position.
Lift Counter Roller knobs so rollers are clear of cable (Figure 76). Pull cable
out from side of unit.
C. SEPARATE uNIT FROm CONDuIT.
1. Open Conduit Clamp.
2. Pull unit away from Conduit.
3. If repositioning the machine, the Deluxe Blower should not be parked on a slope
in excess of 13°. It should not be parked on a side hill of more that 15°.
Figure 75. Remove Cable Seals Figure 76. Open Rollers To
Remove Cable
Figure 73. Raise Tractor Drive
Cover
Figure 74. Turn Off hydraulic
Power