Det-Tronics Mac - w/Supercard - Manual (Page 38)

10. To continue configuration of other points, select the point number
box and:
■ Select the “S” box next to the scroll arrows and enter the
desired Point Number in the Enter Number dialog box.
■ Use the up and down scroll arrows until the desired Point
Number is displayed.
11. Use the above procedure (3 through 9) to configure the rest of
the points.
12. Select Exit once the point configuration is complete. The display
returns to the main Point Configurations screen.
Point configurations can be copied and pasted to speed up the configura-
tion of similar points.
13. Select Save from the File menu to save the new point configura-
tion information to the Configuration file on the OIS hard drive.
14. Download the point configuration to the gateway:
a. Select Download All to download all the point configurations to
the gateway.
b. Select Download One to download the point configurations to a
single selected point. Only the point that is highlighted will be
downloaded.
The gateway will not respond to the new point configuration until the new
point(s) are downloaded.
To delete a single point
1. Select the unwanted point.
2. Select Delete.
A warning box will ask if the selected point should be deleted.
Deleting a point just removes it from the configuration file on the OIS
hard drive. The gateway will still respond to the point. If Download All or
Download One is selected, the gateway will stop responding to the point
and the point will be deleted in the gateway’s memory.
To Find and modify a single point
1. Select Find and enter any portion of the point name you want to
locate.
2. The Find command will search down from the current location
and highlight the first point name that matches the find criteria.
The Find command will only search down from the current location
and will not wrap up to the beginning of the list.
Point Configuration ( Á5)
P
OINT
D
ELETE
AND
F
IND
P
ROCEDURES
2.25
95-8434
!
!
!