Doug Fleenor Design RERUN-P - Manual (Page 2)

Page 2 of 12
PRODUCT DESCRIPTION
The Rerun Portable is a lighting control station capable of storing up to ten 40-minute shows. Shows are
recorded by capturing the output of a DMX512 console. The recorded show start and end points may be
trimmed non-destructively. Each show can be set to hold the last look, loop to itself or link to another show.
Shows are started by pressing one of the ten show buttons.
The Rerun Portable is housed within a rugged Pelican™ water resistant case. Just under the clear case lid are
the DMX512 input and keypad. The DMX512 out and attached wall transformer power supply connections pass
through the case on liquid tight strain reliefs.
The Rerun Portable system can work in conjunction with a lighting console, automatically switching between
recorded shows and console control. When the console generates DMX512 the Rerun Portable retransmits the
incoming DMX512 data. Upon loss of DMX512 from the console, the Rerun Portable starts its previous show.
Rerun also comes in an architectural version (model RERUN-A) and a rack mount version (model RERUN-R?)
The Rerun Architectural and Rerun Portable units can support one universe of DMX512 data. The rack mount
version can be built to support multiple universes of DMX512. Substitute the number of universes in place of
the question mark in the model number for the rack mount version. As many as four universes can be supported
in a single 1U chassis. Additional universes can be supported in the rack mount version using expansion units.