ElmoMC SimplIQ Digital Servo Drives-Whi-Solo Installation Guide - Manual (Page 64)

Solo Whistle Installation Guide Technical Specifications
MAN-SOLWHIIG (Ver. 1.503)
www.elmomc.com
64
Figure 25: Auxiliary Feedback - Encoder Phase Diagram
4.7.4. Auxiliary Feedback Port (input mode YA[4]= 2, 0)
Feature Details
Encoder input,
pulse and direction input • A, B, Index
• Differential
Input voltage V
in
Low: 0 V < V
IL
< 0.8 V
V
in
High: 2 V < V
IH
< 5 V
Maximum absolute voltage: 0 < V
in
< 5.5 V
Input current: ±1 µA
Available as options • Differential Buffered Encoder inputs
• Differential Buffered Pulse and Direction inputs
Edge separation between A & B
Programmable number of clocks to allow adequate
noise filtering at remote receiver of emulated
encoder signals
Index (marker): Length of pulse is one quadrature (one quarter of
an encoder cycle) and synchronized to A&B
Figure 26: Auxiliary Feedback - Encoder Phase Diagram