Englert Color Gard Components - Manual

2.50"
(63.50 mm) 1.50"
(38.10 mm)
4.00"
(102.00 mm)
2.15"
(55.00 mm)
1.50"
(38.10 mm)
12.00"
(305.00 mm)
0.44"
(11.80 mm)
2.15"
(55.00 mm)
1.50"
(38.10 mm)
12.00"
(305.00 mm)
4.00"
(101.60 mm)
1.00"
(25.40 mm)
Unpunched
ColorGard
VersaClip
SnoClip III
S-5! Clamp
Splice
The right way
to attach almost anything to metal roofs!
ColorGard
®
Components
888-825-3432 | www
.S-5.com
Please note: Bars come in 8' lengths, but shown here in 12" diagrams.
All measurements are rounded to the second decimal place.
1. ColorGard ®
ColorGard ® is manufactured from mill
finished high quality aluminum. It
comes in 8' long sections, in punched or
unpunched configurations. Splices are
included with ColorGard for adjacent
sections. For use with S-5! ® standard
clamps, VersaBracket ™ and CorruBracket ™ .
2. Punched Crossmember
Punched ColorGard is slotted every
4" on center for seams that are spaced
accordingly, i.e. divisible by 4". The
slotted configuration works well with
S-5! clamps.
3. Unpunched Crossmember
Unpunched ColorGard is the most
versatile and easy to install, when used
with the S-5! VersaClip ™ . Unpunched
does not need holes, as the VersaClip
accommodates any seam spacing. The
unpunched configuration works well
with VersaBracket, and is the right
choice when the roof is laid out with
untrue seam width or when the seam
width is not divisible by 4. If in any
doubt, use unpunched.
4. VersaClip ™
Purchased separately. VersaClip
makes installation easy as it simply
slides on the ColorGard crossmember.
It can be used with all S-5! clamps
(one per clamp), and is optional with
CorruBracket. VersaClip is not needed
with VersaBracket. VersaClip is also
handy when installing ColorGard
askew, such as is required in the valleys
between intersecting rooflines.