Colorgard, For use with all these s-5, Products – Englert Color Gard Components User Manual
Page 2: Splice, Snoclip, Colorstrip, Check out our
Distributed by
S-5!
®
Warning! Please use this product responsibly!
Products are protected by multiple U.S. and foreign patents. Visit the website at www.S-5.com for
complete information on patents and trademarks. For maximum holding strength, setscrews should
be tensioned and re-tensioned as the seam material compresses. Clamp setscrew tension should be
verified using a calibrated torque wrench between 160 and 180 inch pounds when used on 22ga steel,
and between 130 and 150 inch pounds for all other metals and thinner gauges of steel. Consult the S-5!
website at www.S-5.com for published data regarding holding strength.
Copyright 2011, Metal Roof Innovations, Ltd. S-5! products are patented protected.
S-5! aggressively protects its patents, trademarks and copyrights.
ColorGard
®
dramatically reduces the risks associated with rooftop avalanches
and maintains the clean colorful appearance of the roof with perfect color
and finish matching, which lasts as long as the roof itself! ColorGard is the
only snow retention system designed and engineered on a site-specific basis.
ColorGard
®
1.50"
(38.10 mm)
2.00"
(58.10 mm)
2.00"
(50.80 mm)
For use with all these S-5!
®
products
R
Splice
Included with crossmembers. Use the Splice
to join two pieces of ColorGard
®
together,
ensuring continuous, unbroken protection.
The dimple in the center is designed to provide a gap, allowing
for expansion and contraction of the ColorGard sections.
SnoClip
™
SnoClip
™
is added to retard the migration of snow and ice
beneath the crossmembers. See the SnoClip brochure for more
details.
ColorStrip
Not included. The ColorStrip should be supplied in 2" wide strips
by the manufacturer of the roofing material in order to ensure a
perfect color match for the life of the roof system.
*See optional Limited Lifetime Warranty information at www.S-5-ColorGard.com
Note: Do not use ColorGard with attachment spacing greater
than 32" (81.30 cm). Custom ColorGard, Splice, and SnoClips
are available for seam spacing greater than 32" (81.30 cm).
Please inquire through a distributor.
Check out our
ColorGard
®
Mobile Calculator