ETC Congo Family v6.4.0 - Manual (Page 250)

248
NOTE
If using fixed roles (always server or always backup) make sure that
both consoles are configured into a fixed role (one as server and one
as backup).!
When the Auto-transfer setting is checked in both Server and Backup, the following actions
will be performed each time you make a New, Open, Save or Save As command on the
Server:
• Transfer play to the Backup.
• Save play on the Backup.
• Activate Sync mode.
You can also set the system to transfer the play automatically every time you record a
preset, in the Recording Setup. Hold SETUP and press RECORD.