ETC Congo Family v6.4.0 - Manual (Page 795)

793
Masters - Sequences (6.1)
You can record, load and play back sequences from master playbacks. They are displayed
with an "S" before the number in the master displays.
Once a sequence is loaded to a master you can
• Use the master fader to control the output level
• Use the flash key to flash the sequence
• Use the master key as a GO or Go/Pause key
• Use the flash key as a GoBack key
• Hold MODIFY and press the master key to open the sequence editor (6.1)
Attributes are executed only when the fader is over zero.
Load a sequence to a master
These functions are used to load sequences to masters..
Function Keys Feedback
Load a sequence [#] [SEQ] &
[Master_Key] Sequence # is loaded.
The number and name is
shown in the master
display. If the sequence
doesn't exist it is created.
Load several sequences [#] [SEQ] &
[Master_Keys]
Hold SEQ and keep
pressing new Master
keys to load the next
stored Sequences.
NOTE
You can load a Sequence directly from the Sequences List as well.
See
Sequences List - Insert/Delete/Load .