2 typographical conventions, 1 warnings, 2 note signs – JUMO 709040 TYA-110 thyristor power unit Operating Manual User Manual
Page 8: Abc1, Typographical conventions, 1 warnings 1.2.2 note signs, 1 introduction
1 Introduction
8
1.2 Typographical conventions
1.2.1 Warnings
The signs for Danger and Caution are used in this manual under the following
conditions:
V
Danger
This symbol is used where there may be danger to personnel if the instruc-
tions are disregarded or not followed accurately!
A
Caution
This symbol is used where there may be damage to equipment or data if the
instructions are disregarded or not followed accurately!
E
Caution
This symbol is used if precautions must be taken when handling electrostati-
cally sensitive components.
1.2.2 Note signs
H
Note
This symbol is used to draw your special attention to a remark.
v
Reference
This symbol refers to additional information in other manuals, chapters or
sections.
abc
1
Footnote
Footnotes are comments that refer to specific parts of the text. Footnotes
consist of two parts:
1) The marking in the text, arranged as continuous superscript numbers.
2) The footnote text at the bottom of the page, in a smaller typeface than the
main text, and preceded by a number and a stop.
h
Handling instructions
This symbol marks the description of a required action.
The individual steps are indicated by asterisks, for example:
h Disconnect the instrument completely from the supply
h Remove the instrument cover