JUMO 706581 LOGOSCREEN nt Paperless Recorder with TFT display, CompactFlash Installation Instructions - Manual (Page 27)

27
5 Functional test
After the paperless recorder has been installed and wired up, it can be
commissioned. After applying or switching on the supply voltage, the start-up
screen will appear for a short time.
Start-up screen
The visualization will start automatically after the initialization phase.
Visualization
The paperless recorder is now in the recording phase.
Further steps
A
The recorder can be configured by an authorized person, either by
using the control knob (rotating and pressing) or with the help of
the PC setup program.
Further information about configuration can be found in the
Operating Manual B 706581.0.
Finally, make another check that the connection, configuration and
function of the recorder are all correct.