3 preparing transmitter – JUMO 902930 Wtrans Transmitter RTD Temperature Probe with Ex approval Operating Manual User Manual
Page 30
Advertising
![background image](/manuals/563780/30/background.png)
3 Preparing Transmitter
30
5
Hold the case vertically (as shown in the figure) and, going clockwise, tightly screw
together the case with the case cover.
While doing so, ensure the correct seating of the two seals 5.1 and 5.2 on the case and
case cover.
The case and the case cover are correctly screwed together if no gap can be seen!
Step
Activity
Advertising