JUMO 902930 Wtrans Transmitter RTD Temperature Probe with Ex approval Operating Manual - Manual (Page 15)

15
2 Identifying the Device Version
2.1 Identification markings of the device data
Identification markings on the basic case
Identification markings on the case cover
Identification markings on the protection tube
F-no.
The fabrication no. (F-no.) allows the manufacturer to identify the device.
The fabrication no. (F-no.) indicates the production date (year/week).
The digits in question are those at position 12, 13, 14, and 15.
Example: F-no. = 0012345601011370011
The device has been produced in calendar week 37 in 2011.
Transmitter ID
The transmitter ID is factory set. It must be entered or activated on the receiver to establish a
connection between the transmitter and receiver.
Radio frequency
The JUMO Wtrans transmitter T03 sends at 868.4 MHz.
Description Example
Manufacturer JUMO 36039 Fulda, Germany
Type designation 902930/15-596-1006-2-6-130-1-10-000/362
Fabrication no. (F-no.) 0012345601011370011
Battery Sales no. 90/00525539
Identification markings according to EC directive CE
Certificate number TÜV 11 ATEX 555248
Identification markings according to EU directive II 1 G Ex ia IIB T4 Ga
II 1 D Ex ia IIIB T130 °C Da
Temperature range -30 °C ≤ Ta ≤ +85 °C
Description Example
Note Screw case cover on tightly!
Description Example
Transmitter ID 12345
Radio frequency 868.4 MHz
Marking 70 mm extension tube length
(only for protection tubes without screw connec-
tion)