KV2 Audio ESR215 - Manual (Page 10)

THROUGHT OUT
SUB OUT
SUB OUT
THROUGHT OUT
MAIN
INPUT
MAIN
INPUT
SUB LEVEL
FULL RANGE
MONO OFF ON
OFF ON
AC IN A AC IN B
WWW.KV2AUDIO.COM
DESIGNED BY KV2 AUDIO
MANUFACTURED IN THE EUROPEAN UNION
SERIAL NUMBER WARNING: TO ENSURE PROPER OPERATION ALLOW A MINIMUM OF 6 INS. OF CLEARANCE FROM THIS SURFACE AND ADEQUATE VENTILATION. TO REDUCE THE RISK OF ELECTRIC SHOCK DO NOT REMOVE THIS PANEL OR ANY ATTACHED COMPONENT. NO OPERATOR SERVICED ABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED PERSONNEL. TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THIS APPLIANCE TO RAIN OR MOISTURE.
ESR3000
AVIS: RISQUE DE CHOC ELECTRIQUE NE PAS OUVRIR WARNING: RISK OF ELECTRIC SHOCK DO NOT OPEN
CAUTION
HIGH VOLTAGE: DO NOT REMOVE THIS PANEL
WARNING
AVIS: RISQUE DE CHOC ELECTRIQUE NE PAS OUVRIR WARNING: RISK OF ELECTRIC SHOCK DO NOT OPEN
CAUTION
HIGH VOLTAGE: DO NOT REMOVE THIS PANEL WARNING
Main Signal
Input A
Main Signal
Input B
FULL RANGE
OFF
ON
AC IN A AC IN B
SERIAL NUMBER WWW.KV2AUDIO.COM
DESIGNED BY KV2 AUDIO
MANUFACTURED IN THE EUROPEAN UNION
BRIDGE - INPUT A
INPUT A 1600W / 4
BRIDGE
OUTPUT A
INPUT B
OFF ON 3200W / 8
1600W / 4 OUTPUT B
Using the system
External subwoofer setup
Set ESR3000 Amplifier to FULL RANGE OFF mode. Signal is crossed over at Hi/Mid for ESR215 cabinets
and SUB for external subwoofer.
SUB SET UP LEVEL setting depends on which subwoofer unit is used.
Mid/Hi
Output A Mid/Hi
Output B
Sub
Output A Sub
Output B
ESR3000
Using the system
10
ESR215
SPEAKER B
VHD4.18 VHD4.18
ESR215
SPEAKER A
VHD4.18 VHD4.18