Metal Sales TDR-6 - Manual (Page 6)

PI/D-6 © Metal Sales Manufacturing Corporation/ Subject to change without notice/ Effective Date 9/11
800.406.7387 (Corporate Office) • www.metalsales.us.com
I
ndustrIal
r
Ib
/ d
eep
r
Ib
s
erIes
T15 P
anel
o
verview
T15 ROOFING PANEL PROFILE
T15 SIDING PANEL PROFILE
C
4"
3"
3" 7"
4"
C
3"
3" 7"
SLOPE
SUBSTRATE
COVERAGE
LENGTH
AVAILABILITY
APPLICATION
FASTENING SYSTEM
FASTENERS
MATERIALS
FINISHES
The minimum recommended slope for any T15 roof panel is 1:12. Metal Sales recommends that in all roof
applications sealant be used on sidelaps.
T15 panel is designed to be utilized over open structural framing, but can easily be used with a solid substrate.
The recommended substrate is 5 /
8
" plywood with a 30 pound felt moisture barrier. To avoid panel distortion, use
a properly aligned and uniform substructure.
Each panel has a coverage of 30"
Lengths under 5'-0" are available with some cutting restrictions. Maximum recommended panel length is 45'-
0". Longer panels require additional consideration in packaging, shipping, and erection. Please consult your
Metal Sales branch for recommendations (see PGI-2 and PGI-3 for locations).
Commercial, Industrial, and Architectural panels.
Direct Fastened (exposed).
The fastener selection guide should be consulted for choosing proper fasteners for specific applications. Quan-
tity and type of fastener must meet necessary loading and code requirements (see PGI-12-14).
Steel grade 50, per ASTM A-792, Optional material: stainless steel, copper, and aluminum.
Panels are available in 24 through 16 gauge. Minimum quantities may apply.
Custom capabilities include:
-Crimp curving on numerous panel profiles.
-Curving may be convex, concave, or "S" curves.
-Perforated panels for wind screens and liner panels.
 * Acrylic Coated Galvalume ® (ACG) / ASTM A-792 - AZ55  Multi-Pass Kynar
 Prepainted Galvalume / ASTM A-792 - AZ50  Marbilique
 MS Colorfast45 ®  Plastisol
 ** Fluorocarbon (PVDF)  Polyester
* Differential appearance of Acrylic Coated Galvalume roofing materials is not a cause for rejection.
** Meets both Kynar 500 and Hylar 5000 specifications.
30" Coverage
30" Coverage
10" Pitch
10" Pitch