MMF POS Advantage Series IBM Till Conversion Kit - Manual

Advantage Advantage ® Series Series - - Till Conversion Adapter Kits Till Conversion Adapter Kits
Installation Instructions
For more information on the Advantage® Series visit http://www.mmf
pos.com
FIG.2
FIG.1
Part# 226199CONV0100
Description: Heritage
Series® / M-S® Till
Adapter
Open Cash Drawer and
remove cash till (if present).
Extend the inner drawer to
a full open position. (FIG.1)
Remove the protective
strip layer from the double-
sided tape of the Till
adapter.
Position and secure the
Till Adapter to the back of
the inner drawer as
illustrated in FIG 2.
Insert the Heritage
Series® or M-S® Till into
the MMF Advantage®
Series Cash Drawer as
illustrated in Fig.3.
Check for proper fit by
closing the drawer and
making sure till is below
drawer front.
Part# 226199CONV0200
Description:
APG® Till Adapter
Open Cash Drawer
and remove cash till (if
present). Extend the
inner drawer to a full open
position. (FIG.1)
Remove the protective
strip layer from the
double-sided tape of the
Till adapter.
Position and secure
the Till Adapter to the left
side of the inner drawer
as illustrated in FIG. 2.
Insert the APG® Till
into the MMF
Advantage® Series Cash
Drawer as illustrated in
Fig.3.
Check for proper fit by
closing the drawer and
making sure till is below
drawer front.
FIG. 1 FIG. 1 FIG. 1 FIG. 1
FIG.3
FIG.2
FIG.3
FIG.2
FIG.3
Part# 226199CONV0300
Description:
NCR® Universal Till
Adapter
Open Cash Drawer
and remove cash till (if
present). Extend the
inner drawer to a full open
position. (FIG.1)
Remove the protective
strip layer from the
double-sided tape of the
Till adapter.
Position and secure
the Till Adapter to the left
side of the inner drawer
as illustrated in FIG. 2.
Insert the NCR®
Universal Till into the
MMF Advantage® Series
Cash Drawer as
illustrated in Fig.3.
Check for proper fit by
closing the drawer and
making sure till is below
drawer front.
Part# 226199CONV0400
Description:
NCR® Standard Till
Adapter
Open Cash Drawer
and remove cash till (if
present). Extend the
inner drawer to a full open
position. (FIG.1)
Remove the protective
strip layer from the
double-sided tape of the
Till adapter.
Position and secure
the Till Adapter to the left
side of the inner drawer
as illustrated in FIG 2.
Insert the NCR®
Standard Till into the
MMF Advantage® Series
Cash Drawer as
illustrated in Fig.3..
Check for proper fit by
closing the drawer and
making sure till is below
drawer front.
Part# 226199CONV0500
Description:
IBM ® Till Adapter
Open Cash Drawer
and remove cash till (if
present). Extend the
inner drawer to a full open
position. (FIG.1)
Remove the protective
strip layer from the
double-sided tape of the
Till adapter.
Position and secure
the Till Adapter to the left
side of the inner drawer
as illustrated in FIG 2.
Insert the IBM® Till into
the MMF Advantage®
Series Cash Drawer as
illustrated in Fig.3.
Check for proper fit by
closing the drawer and
making sure till is below
drawer front.
FIG.2 FIG.2
FIG.3 FIG.3
DOC: INST., ADV, TILL CONVERSION
P/N:531-9210-00 (Rev. 5/1/10)