MMF POS PAX SP30 Transaction Terminal STAND - Manual

Transaction Terminal Stand (P/N:225-7594-04)
Quick Installation Instructions
Designed for PAX® SP30
INSTALLATION
1. Remove stand from packaging box. Firmly secure
the base pole by bolting four (4) screws through
the base plate to a flat counter surface. (Screws
are not included as they need to suit your specific
desktop or platform thickness) .
2. Remove the security brackets from the top of the
stand by removing the two screws.
3. Mount payment terminal to stand; align and slide
the
PAX® SP30 terminal in place.
4. Secure the terminal by tightening the two button
head cap screws on the Security Bracket from
behind the mounting plate using the Allen Wrench
provided in the kit.
5. Secure the stand’s tilt adjustment as desired by
tightening the two side thumb screws on the
mounting plate on each side of the stand.
6. Make cable connections as needed . Guide cable
connections down and out through the bottom
opening.
For parts and/or additional accessories, contact your supplier or visit our website at www.mmfpos.com
TTS-14 Inst . Sheet (12-3-2012)
COPYRIGHT BY MMF POS
COMPANY, WHEELING, IL
TOOLS AND HARDWARE REQUIRED
• One (1) Allen Wrench is included with kit to tighten the
button head cap screws from behind the mounting plate.
• NO other hardware or tools are included for mounting
stands to a surface. Hardware will need to suit your
specific desktop or platform thickness.
• Phillips Head Screwdriver or power drill will be required
to mount stand to surface (if necessary).
Basic Overview
Note: Images are not to scale .
2” Height Pole Stand
P/N:225-7594-04
R
e
p
la
c
e
m
e
n
t
P
a
r
t
s
Thumb Screw
P/N: 225-76901-04
SPECS
Rotation: 180°around display pole
Overall Height & Tilt Adjustment (without Terminal) :
•30⁰ Tilt= 4 3/8” high
•45⁰ Tilt= 5 1/8” high
Pole Diameter: 1.5”
Pole Height: 2”
Base Dimensions: 5” x 5”
Construction: 18 gauge Steel
Finish: Textured powder coat
Cable Management: Designed with openings for easy and
convenient cable access and routing.
Color: Black
Designed for
PAX® SP30
Cable Management
Opening
Thumb
Screws to
adjust Tilt
180°
Rotation
with Stop
to prevent
cable
strain
Front View Side View
Security
Brackets to
secure
terminal to
Stand
(Hardware
included with
KIT)