Sensaphone CELL682 - Manual (Page 67)

65
Chapter 10: Cell682 Web page
Similarly you can change Output programming, Notification programming, and
Machine-to-machine programming.
switching oUtpUts Via the web page
To switch an output, Login to the web page and click Outputs. Next, click on the
Output number you want to switch. On the programming screen, locate the State
field and select On or Off, then click OK. The command to switch the output
will be sent to your unit. Note that this may take 1–2 minutes.
alarM acknowledgeMent history
An alarm history log is available on the web page to provide details on alarms
that have occurred and whom acknowledged them. The log can be queried
by entering a start and end date range, or by selecting one of the QuickDates
options. Note that the time stamps appearing on the web page do not indicate
when the alarm occurred, but rather the time that they were received by the web
server.