3D Robotics RTF Y6 - Manual (Page 7)

To arm the motors, hold the left stick
down/right until the motors spin.
6
Control your copter in flight using the
transmitter’s left and right sticks. Use the
left stick to control throttle (power) and
yaw (rotation); use the right stick to
control roll (left and right movement) and
pitch (forward and backward movement).
Navigate by orienting the copter with the
blue arms facing forward.
7
After landing, disarm the motors by
holding the left stick down/left until
the motors stop.
8
Once the motors are disarmed, disconnect the
battery. Once the copter is powered off, turn off
the transmitter.
10
Press the safety button until it displays blinking
red to make the copter safe to handle.
9
roll
pitch
yaw
throttle
5 The safety button indicates when the
copter is safe to handle. When you’re
ready to fly, press and hold the safety
button until it displays solid red. This
indicates that the copter is now active.
safety button