Rockwell Automation 20D PowerFlex 700S Phase II Drive Frames 1...6 Installation Instructions - Manual (Page 61)

Rockwell Automation Publication 20D-IN024C-EN-P - July 2013 61
PowerFlex 700S Adjustable Frequency AC Drive - Phase II Control
DriveLogix 5730 Controller Option
Refer to the DriveLogix 5730 Controller for PowerFlex 700S Drives with Phase
II Control User Manual, publication
20D-UM003 , for details on using and
configuring this option.
DriveLogix5730 Controller Specifications
DriveGuard® Safe Torque Off with Second Encoder Option
Refer to the DriveGuard Safe Torque Off Option for PowerFlex® 700S Phase II
AC Drives and PowerFlex 700L Liquid-Cooled AC Drives User Manual,
publication
20D-UM007 , for details on installing and configuring this option
board.
Refer to Appendix J “Instructions for ATEX Approved PowerFlex 700S Phase II
Drives in Group II Category (2) Applications with ATEX Approved Motors”, in
the PowerFlex 700S Drive with Phase II Control Programming Manual,
publication
20D-PM001 , for details on ATEX approved applications.
IMPORTANT The DriveLogix controller option ships with the battery installed, but
disconnected. You must connect the battery while installing the drive.
ATTENTION: This product contains a 3V Lithium battery if the DriveLogix
Controller option board is installed. Perchlorate Material - special handling may
apply. See
www.dtsc.ca.gov/hazardouswaste/perchlorate
Category Specification
Serial port RS-232, fully isolated
DF1, DH-485, ASCII
38.4 kilobit/s maximum
Optional embedded EtherNet/IP RJ-45 or 100BaseT
10/100 MB/s
Connectivity options
(these options require the Logix
Expansion Board and Expanded
Cassette) • NetLinx communication daughtercards
(ControlNet, EtherNet/IP, DeviceNet, Third Party)
• Compact I/O connection
• CompactFlash (memory card)
User memory 1.5 MB
Non-volatile memory 1784-CF64 CompactFlash
Maximum number of I/O banks 2
Maximum number of I/O modules 16
(8 modules per bank or 4 max on either side of the power supply)
Battery 1769-BA
Serial cable 1756-CP3 directly to controller
1747-CP3 directly to controller
Compact I/O Cable 20D-DL2-CR3
20D-DL2-CL3