Rockwell Automation 294D ArmorStart LT Distributed Motor Controller DeviceNet Version - User Manual - Manual (Page 222)

222 Rockwell Automation Publication 290D-UM001A-EN-P - June 2012
Appendix B CIP Information
The following state transition diagram is used for an unbound Bulletin 290D
Figure 45 - State Transition for Unbound Bulletin 290D
Non-Existent
Available
Idle
Ready
Run
DNet Fault
Receive Idle
Power off
Connection
Transitions to
Established
Protection Fault
Protection
Fault
Protection Fault
Protection Fault Reset
Connection Transitions to Established
DNet Fault
Receive
Data
DNet
Idle
Ready
DNet Fault
Protection Fault
Protection
Fault
DNet Fault
Power up