Rockwell Automation 1757-SWKIT4000 ProcessLogix R400.0 Installation and Upgrade Guide - Manual (Page 101)

Publication 1757-IN040B-EN-P - March 2002
ProcessLogix Server Upgrade Procedures 4-11
and press Enter.
Depending on the size of your database, this may take several minutes.
10. To start the ProcessLogix Server Key in the following command:
>hscserver /start /y<
and press Enter.
Importing the Engineering Database
Perform the steps below to import the Engineering Database. For a
redundant Server pair, these steps are performed on SERVERB.
1. Logon to the system as ps_user.
2. Click Start
⇒
Programs
⇒
ProcessLogix Engineering
Tools
⇒
Control Builder.
3. In the Login dialog box, make these entries:
a. Key in >mngr< as the default User Name.
b. Key in >mngr1< as the default Password.
c. Key in >localhost< in the Server Name field.
4. Select File
⇒
Import.
5. Set the Directory Path to import the data from
C:\Honeywell\tps50\ixport\import.
6. Click Select All.
Depending on the size of your database, this may take several
minutes.
7. Click Import.
Depending on the size of your database, this may take several
minutes to several hours.
8. When completed, close the Import Window.
9. Click OK.