Rockwell Automation 1792-IB2XOB2E/B INSTL.INST ARMOR BLOCK 2 INPUT User Manual
Page 30
ArmorBlock 2 Input/2 Output Module
30
Publication 1792-5.5 – October 1996
”Defines output behavior in the event of a communication fault.”,
0,1,0,
$ Min, Max (max enumeration #), and Default values
1,1,1,0,0,0,0,0,0;
$ Not Used
$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$
$$$$$$$$$$
Param5 =
$ Idle State selection
0,
$ reserved
6,
$ Link Path Size
”20 1E 24 01 30 09”,
$ Link Path to DOG object’s idle state attribute.
0x0002,
$ No support for settable path, scaling, scaling links,
$ or real time update of value. Value is gettable and
$ Settable. Enumerated strings are supported.
4,
$ Data Type – boolean
1,
$ Data Size
”Idle State”,
$ Parameter Name
””,
$ Units String
$$$$$$$$$$ Help string $$$$$$$$$$$
”Defines output behavior during program mode.”,
0,1,0,
$ Min, Max (max enumeration #), and Default values
1,1,1,0,0,0,0,0,0;
$ Not Used
$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$
$$$$$$$$$$
Param6 =
$ Reset Faulted I/O
0,
$ reserved
6,
$ Link Path Size
”20 0F 24 06 30 01”,
$ Link Path to param instance.
0x0002,
$ No support for settable path, scaling, scaling links,
$ or real time update of value. Value is gettable and
$ Settable. Enumerated strings are supported.
8,
$ Data Type – unsigned short int
1,
$ Data Size – (in bytes)
”Reset Faulted I/O”,
$ Parameter Name
””,
$ Units String
$$$$$$$$$$ Help string $$$$$$$$$$$
”This resets the voltage supplied to sensors or a faulted output. A reset will only be
accepted if a fault exists.”,
0,3,0,
$ Min, Max (max enumeration #), and Default values
1,1,1,0,0,0,0,0,0;
$ Not Used
$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$
$$$$$$$$$$
Param7 =
$ Input 1 value
0,
$ reserved
6,
$ Link Path Size
”20 08 24 01 30 03”,
$ Link Path to Input 1 value attribute.
0x0030,
$ No support for settable path, scaling, or scaling
$ links.
$ Value is gettable only. Enumerated strings are not
$ supported.
8,
$ Data Type – unsigned short int
1,
$ Data Size – (in bytes)
”Input 1 Value”,
$ Parameter Name
””,
$ Units String
$$$$$$$$$$ Help string $$$$$$$$$$$
”This parameter is the current value of Input 1.”,
0,1,0,
$ Min, Max, and Default values
1,1,1,0,0,0,0,0,0;
$ Not Used