Rockwell Automation PLC-5 Fieldbus Solutions for Integrated Architecture User Manual - Manual (Page 158)

Publication 1757-UM006A-EN-P - May 2002
6-4 1757-FIM General Maintenance, Checkout, and Calibration
2. Click Load Firmware.
The Device Firmware Upgrade window opens.
3. Click Upgrade.
The Open window opens.
4. Locate and select the vendor’s upgrade file.
5. Click Open.
This initiates the firmware upgrade.
6. After the firmware upgrade is complete, wait for the device to
rejoin the network. This may take up to 3 minutes.
7. When the device has rejoined the network, click the close
the window.
8. Verify that there is an existing template listed in the Templates
column that matches the upgraded version of the device.