Wire the adapter – Rockwell Automation 1738-AENT, Series B ArmorPOINT I/O EtherNet/IP Adapter User Manual
Page 10
10 1738 ArmorPOINT I/O EtherNet/IP Adapter
Publication 1738-IN031A-EN-P - July 2013
Wire The Adapter
Following are the wiring instructions for the adapter.
1738-AENT EtherNet/IP Connector
1738-AENT Mini Style 4-Pin in Male Connector
(1)
IMPORTANT
Analog modules have earth grounded metal rings. This should be
considered when choosing shielded cables and grounding techniques.
ATTENTION: Make sure all connectors and caps are securely tightened to
properly seal the connections against leaks and maintain IP enclosure type
requirements.
(1)
Auxiliary power cable: standard cordset (single-ended), for example Allen-Bradley part number 889N-F4AFC-6F or
889N-R4AFC-6F; or standard patchcord (double-ended), for example, Allen-Bradley part number 889N-F4AFNU-6F or
889N-F4AFNV-6F. Refer to publicat
for more information.
(view into connector)
Pin 1 - Tx +
Pin 2 - Rx +
Pin 3 - Tx -
Pin 4 - Rx -
M12 Female in Connector
43765
(view into connector)
Pin 1 - User Power +
Pin 2 - Adapter Power +
Pin 3 - Adapter Power -
Pin 4 - User Power -
43587
Mini Style 4-Pin in Male Connector