Rockwell Automation 2727-G7P20D3Q7 MobileView G750 Guard Machine Terminal - Manual (Page 89)

1 Publication 2727-UM002D-EN-P
Chapter
6
CE Thin Client Operating Instructions
Chapter Objectives This chapter provides instructions on how to:
• start up or power on the MobileView terminal
• start an auto launch sequence
• configure Ethernet network settings
• save registry settings
• start terminal services
• shut down or power off the MobileView terminal
• setting the date and time
Starting Up/Powering On
the Terminal To start up or power on the MobileView terminal:
1. Attach the MobileView Connection Cable to the Junction Box
Cable as shown on page 3-4. Tighten threaded coupling until it
is finger tight.
2. Check the MobileView terminal for a start-up screen.
If the start-up screen does not appear, check the 24V dc power source
and cable connections at the Junction Box and MobileView terminal.