Rockwell Automation 2711E-xxxx User Manual PanelView 1000e, 1200e 1400e - Manual (Page 14)

Chapter
1
Publication 2711E-6.17 – November 1998
Introducing the PanelView
Terminals
This chapter provides an overview of the PanelView 1000e, 1200e,
and 1400e operator terminals. It describes:
•
types and features of the PanelView terminals
•
new features of the PanelView terminals
•
options and accessories
•
the supported Allen-Bradley PLC, SLC, Logix controllers, and
Remote I/O scanners for Remote I/O, Data Highway Plus (DH+)
and ControlNet communications
PanelView 1000e, 1200e, and 1400e terminals are the latest
generation of PanelView terminals. Like the PanelView 1200
terminals, PanelView 1000e, 1200e, and 1400e terminals provide a
fast, easy, flexible, and low-cost operator interface for a PLC system.
They are ideal replacements for traditional control panels.
PanelView 1000e, 1200e, and 1400e terminals are pre-assembled and
ready to install in a control panel cutout or 19-inch rack with the
adapter kit. They connect directly to any Allen-Bradley Remote I/O,
Data Highway Plus (DH+), or optionally, ControlNet link.
An Allen-Bradley, IBM PC

, or compatible computer (the
development computer) is used to create terminal screens and
functions. Refer to the PanelBuilder 1400e Configuration Software
for Windows User Manual for complete information.
Table 1.A lists the PanelView 1000e, 1200e, and 1400e terminal line
and the accompanying software. Note that Series F and above
PanelView 1200 terminals can be enhanced to PanelView 1200e
functionality. Unless otherwise indicated, replacement kits and
accessories can be used for PanelView 1000e, 1200, 1200e, and
1400e terminals.
Welcome to the PanelView
Family