Rockwell Automation IASIMP Computer Numerical Control (CNC) Machining Accelerator Toolkit Quick Start - Manual (Page 167)

Rockwell Automation Publication IASIMP-QS034A-EN-P - October 2012 167
FactoryTalk View ME Configuration
Chapter 5
Configure Parameter Files
In this example, you configure a parameter file for each device or logic module in your application supported by a
faceplate.
1. Right-click a parameter file for a device in your application and
choose Rename.
2. Rename the parameter file with the name of the corresponding
device in your RSLogix 5000 application.
If more than one device uses the same faceplate then another
parameter of the same type must be duplicated and renamed.
Refer to
step 4 and step 5 on page 157 .
For the CNC Work Cell example, these are the parameter files.
3. Click OK.
Base Parameter File Name CNC Work Cell Parameter File Name
Fanuc_CNC_Parameter
Drill_CNC
Machine_CNC
CIPMotion_Parameter
Gantry_X_Axis
Gantry_Y_Axis
EquipmentStatus_Parameter EquipmentStatus
Startup_Parameter Startup
StateDiagram_Parameter StateDiagram