Rockwell Automation 1897-NOV High Speed Analog Installation Instructions - Manual (Page 2)

Fast Isolated Analog Output Module 2
Publication CIG-5.1 – April 1998
If this product has the CE mark it is approved for installation within
the European Union and EEA regions. It has been designed and
tested to meet the following directives.
EMC Directive
This product is tested to meet Council Directive 89/336/EEC
Electromagnetic Compatibility (EMC) and the following standards,
in whole or in part, documented in a technical construction file:
•
EN 50081-2EMC – Generic Emission Standard,
Part 2 – Industrial Environment
•
EN 50082-2EMC – Generic Immunity Standard,
Part 2 – Industrial Environment
This product is intended for use in an industrial environment.
Low Voltage Directive
This product is tested to meet Council Directive 73/23/EEC
Low Voltage, by applying the safety requirements of EN 61131–2
Programmable Controllers, Part 2 – Equipment Requirements and
Tests.
For specific information required by EN 61131-2, see the appropriate
sections in this publication, as well as these Allen-Bradley
publications:
Publication Publication number
Industrial Automation Wiring and Grounding Guidelines
For Noise Immunity 1770-4.1
Guidelines for Handling Lithium Batteries AG-5.4
Automation Systems Catalog B111
This equipment is classified as open equipment and must be mounted
in an enclosure during operation to provide safety protection.
The module receives its power through the 1771 I/O power supply
and requires 2A from the backplane.
Add this current to the requirements of all other modules in the I/O
chassis to prevent overloading the chassis backplane and/or
backplane power supply.
Understand Compliance to
European Union Directives
Calculate Power
Requirements