Rfi cold air intake, Preparing the rfi intake – Bully Dog 53153 Rapid Flow Induction (RFI) Cold Air Intake User Manual

Page 8

Advertising
background image

7

RFI COLD AIR INTAKE

6. Use a 10 mm socket to remove all four machine screws from

the mounting plate and remove the mounting plate. Set

aside three of the machine screws. You will need them to

install the Bully Dog RFI Cold Air Intake.

Preparing the RFI Intake

1. Snap the Bully Dog air intake tube with MAF mount into the

Bully Dog RFI enclosure base.

2. Use the T20 Torx® bit to remove the MAF sensor from the

OEM intake tube.

Advertising