Metrohm 731 Relay Box - Manual (Page 31)

5.1 Warranty
731 Relay Box, Instructions for use 25
5 Warranty and certificates
5.1 Warranty
The warranty regarding our products is limited to rectification free of
charge in our workshops of defects that can be proved to be due to
material, design or manufacturing faults which appear within 12
months from the day of delivery. Transport costs are chargeable to
the purchaser.
For day and night operation, the warranty is valid for 6 months.
Glass breakage in the case of electrodes or other glass parts is not
covered by the warranty. Checks which are not a result of material or
manufacturing faults are also charged during the warranty period.
For parts of outside manufacture insofar as these constitute an ap-
preciable part of our instrument, the warranty stipulations of the
manufacturer in question apply.
With regard to the guarantee of accuracy, the technical specifica-
tions in the Instructions for Use are authoritative.
Concerning defects in material, construction or design as well as the
absence of guaranteed features, the purchaser has no rights or
claims except those mentioned above.
If damage of the packaging is evident on receipt of a consignment
or if the goods show signs of transport damage after unpacking, the
carrier must be informed immediately and a written damage report
demanded. Lack of an official damage report releases METROHM
from any liability to pay compensation.
If any instruments and parts have to be returned, the original pack-
aging should be used if at all possible. This applies above all to in-
struments, electrodes, buret cylinders and PTFE pistons. The parts
must be packed in a dustproof package (for instruments the use of a
plastic bag is imperative) before embedding them in wood shavings
or similar material. If open assemblies are enclosed in the scope of
delivery that are sensitive to electromagnetic voltages (e.g. data in-
terfaces, etc.) these must be returned in the associated original
protective packaging (e.g. conductive protective bag).
Exception: Assemblies with built-in voltage source belong in a
non-conductive protective packaging. For damage which arises as a
result of non-compliance with these instructions no warranty respon-
sibility whatsoever will be accepted by Metrohm.