Metrohm 930 Compact IC Flex SeS - Manual (Page 47)

￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭
3 Installation
930 Compact IC Flex SeS (2.930.1400)
￭￭￭￭￭￭￭￭ 39
1 Preparing the adsorption cartridge holder
￭ Push the 4 clips into the slots on the adsorption cartridge holder.
2 Connecting adsorption cartridges
￭ Attach the PVC tubing to the tip of the H
2
O adsorption cartridge.
￭ Insert the adapter into the other end of the PVC tubing.
￭ Insert the adapter into the star-shaped cap of the CO
2
adsorption
cartridge.
￭ Attach the capillary connected to the MCS's Air in connection to
the tip of the CO
2
adsorption cartridge.
3 Inserting the adsorption cartridges into the adsorption car-
tridge holder
￭ Clamp the two adsorption cartridges in place using the clips on
the adsorption cartridge holder.
4 Putting the adsorption cartridge holder into the instrument
￭ Place the adsorption cartridge holder with cartridges into the
instrument's detector chamber.