Watts ISCA-141-4-D - Manual

ES-WD-ISCA-141-4-D USA 1344 ISCA-141-4-D
Tag:
ISCA-141-4-D Industry Standard Back-to-back
Thin Wall Closet Carrier
SPECIFICATION: Watts Drainage ISCA-141-D Industry Standard back-to-back vertical thin wall water closet carrier with epoxy
coated cast iron fitting, 4"(102) no hub waste and 2"(51) or 4"(102) vent connection, epoxy coated cast iron patented
compression seal faceplate assembly, epoxy coated cast iron foot supports adjustable for standard and wheelchair height,
adjustable ABS nipple with integral test cap and neoprene bowl gasket, plated hardware and chrome cap nuts. Carrier
complies with requirements of ASME A112.6.1M up to a 300 lb. (136 kg.) static load.
Notes:
Anchor legs to concrete floor with minimum 1/2" (13) anchor
bolts (by others).
X = 5-3/4" (146) Maximum with Standard Nipple
12" (305) MIN 22" (559) MAX
5/16"
(8)
5/16"
(8)
2-3/32" (53)
7" (178)
2-3/32" (53)
X"
X"
9"
(229)
7/1/2"
(191)
17-3/4"
(451)
4-1/2"MIN
(114)
9-1/2"MAX
(241)
15"
(381)
1"MIN
(25)
3"MAX
(76)
Options (Select One or More)
Suffix Description
-M1 ABS Extended Nipple (Up to 24")
-M11 Tiling Frame
-M20 Flush Valve Support
-M23 2"(51) RH Auxiliary Inlet
-M24 2 "(51) LH Auxiliary Inlet
-V2 2"(51) NH Vent Connection
-US Buy American Compliant
-V4 4”(102) NH Vent Connection
with 3/4”-10” Stainless Steel Studs
-XH Extra-Heavy 500lb. Carrier
(ASME A112.6.1M)