E-flite Extra 260 3D 480 ARF - Manual (Page 12)

12 E-flite Extra 260 480 ARF Assembly Manual
 3. Slide the cowling onto the fuselage. Secure the cowl
using four 2mm x 8mm sheet metal screws.
Hint: Use thin CA to harden the holes drilled into the
cowl mounting tabs. This will help to prevent the screws
from vibrating loose in flight.
 4. Slide the propeller adapter through the hole in
the propeller.
 5. Slide the 1 /
2
-inch (13mm) plastic washer onto the
adapter.
 6. Slide the spinner backplate onto the adapter. Thread
the propeller nut onto the adapter, but do not tighten it
at this time.