Glyph DVD Duper1 - Manual (Page 50)

46
AEC-7763LC/LD & ARS-2022/2022D
5.12.8 Compare Firmware
On the above figure press ESC and
▼
to enter the following figure.Compare
Firmware is to compare the current firmware version and the newly downloaded
version. It can prove if the downloaded version is the newest one.
5.12.9 H/W Diagnostic
Press ESC and
▼
to enter the next figure. H/W Diagnostic is to test the system.
12-08. Adv Setup
Compare Firmware
12-09. Adv Setup
H/W Diagnostic
Press ENT to enter the next figure. Follow the instructions on LCD to do the button
test. After that, the system will do the self-test of SDRAM, the hardware connection
test and flash test. All test results will be shown on LCD. It is the easiest way to
know if the system can work well.
↑ ↓
Enter ESC
Holde ESC to exit
When the whole process finishes, LCD will show the message as follows.
Test finished