Glyph DVD Duper1 - Manual (Page 9)

5
AEC-7763LC/LD & ARS-2022/2022D
3.2.2 Without a HDD
If you don’t install a 3.5” hard drive to ARS-2022D, the operation procedures will be
as follows.
l
Place a source DVD into DVD-ROM.
l
Switch to function 1 Copy by pressing
▲ . Place a blank DVD disk into
the DVD writer, and press ENT to start copying.
l
When copying comes to an end, the passed DVD will eject automatically.
The default is automatic ejecting, but you can change it.
l
The failed DVD will remain in the writer. The default is keeping a failed
DVD in the writer, but you can change it. To take the failed DVD you need
to press the “eject” button on the writer.