Reloop SPIN! - Manual (Page 54)

Click on „Volume“ under the item „Sound Playback“ and maximise all faders.
The option „Sound Recording“ for a
vinyl record or CD setup differ.
1) Vinyl settings
Click on the „Sound Recording“
button and maximise the fader.
2) CDJ settings
Click on the „Sound Recording“
button and minimise the fader.
Afterwards you can close the control panel.
e) Additional functions and connections of your Spin! interface:
USB LED -4-:
Shines when the interface has been recognized by the computer and is
active.
NOTE!
The interface is supplied with power via USB. A connection to mains is
not necessary.
Headphones -5 / 6-:
Here you can connect headphones (3,5 mm jack) in order to be able to
monitor the master output signal directly from the interface -5-. Via the
monitor knob -6- you can adjust the volume.
NOTE!
You can also use this output as recording connection in order to record
a set for example.
Microphone -7 / 8-:
You can connect a microphone to this jack (6,3 mm jack). The volume can be
adjusted with the knob -8-.
ATTENTION!
The microphone input is linked to the stereo output. This means you can
either use a microphone or the channel 1 signal. Make sure that no
microphone is connected during normal Spin! timecode use as the
channel would be blocked.
54
ENGLISH
1) 2)