SoundOff Signal nFORCE® Interior Traffic Controller - Manual (Page 11)

IMPORTANT INFORMATION:
Warning devices are strictly regulated and governed by Federal, State and Municipal ordinances. These devices shall be used ONLY on approved vehicles. It is the sole responsibility of the user of these devices to ensure compliance.
To review our Limited Warranty Statement & Return Policy for this or any SoundOff Signal product, visit our website at www.soundoffsignal.com/sales-support.
If you have questions regarding this product, contact Technical Services, Monday - Friday, 8 a.m. to 5 p.m. at 1.800.338.7337 (press #4 to skip the automated message).
Questions or comments that do not require immediate attention may be emailed to [email protected].
SUPERIOR CUSTOMER RELATIONSHIPS. SMARTLY DESIGNED LIGHTING & ELECTRONIC SOLUTIONS.
nFORCE® LED Traffic Controller - Interior Use Only
ENFTCDGS12(xx)
nFORCE Traffic Controller 9.14
Connection of Lightbar Breakout Box to SoundOff Signal Siren:
Note: Requires PC configuration app to map siren control switches to lightbar functions
Plug 1 end of RJ-45 cable to available jack on siren amplifier
Plug other end of RJ-45 cable to ‘siren’
ETSA481CSR or ETSA482CSR
CN6
CN2
CN3
CN8
CN5
ETSA481RSP, ETSA482RSP, ETSA461HPP, ETSA462HPP
RJ-45 Splitter
(user supplied)
Siren Controller
ETSA380R or ETSA385HR
4" RJ-45 Jumper
Cable
11.
Lightbar
Breakout Box - Front Breakout Box - Back
Lightbar
Breakout Box - Front Breakout Box - Back
Lightbar
Breakout Box - Front Breakout Box - Back