Quoizel EI8604C Ellis - Manual

FIXTURE SUPPLY
WIRE and
GROUND WIRE
OUTLET BOX
(2) MOUNTING SCREWS
(2) OUTLET
BOX SCREWS
(not supplied)
UNIVERSAL
CROSSBAR
BACKPLATE
(2)MOUNTING BALLS
SOCKET
COLLAR
SHADE
SOCKET
1. Before beginning the installation, carefully unpack and identify all
parts referring to illustration.
2 Turn the electrical power to installation point OFF at circuit
breaker
3 Locate the UNIVERSAL CROSSBAR and secure it to the OUTLET
BOX with 2) OUTLET BOX SCREWS not supplied
4. Make the connections: Using wire connectors (not supplied), connect
the HOUSE GROUND to the FIXTURE GROUND WIRE attach
the HOUSE WHITE WIRE to FIXTURE WHITE (or RIBBED SIDE)
SUPPLY WIRE; connect the HOUSE BLACK (or RED) WIRE to the
FIXTURE BLACK(or SMOOTH SIDE) WIRE. Wrap each connection
with approved electrical tape.
5. Carefully tuck all wires into the OUTLET BOX and
position the fixture over the outlet box. Align the HOLES in the
BACKPLATE with the 2
MOUNTING SCREWS attached to the
UNIVERSAL CROSSBAR. Pass the fixture over the 2 MOUNTING
SCREWS and secure against by threading 2 MOUNTING BALLS
onto end of screw. Tighten until snug.
6. Position SOCKET through the hole on the bottom center of SHADE.
Secure SHADE by threading SOCKET COLLAR onto SOCKET. Hand
tighten until snug.
7.Install bulbs referring to fixture markings and/or labels for maximum
wattage.
8 Restore power to the installation point ON. Retain this sheet for
future reference.
.
.
( ( ).
( )
( )
( )
.
,
.
;
INSTALLATION INSTRUCTIONS
IF IN DOUBT ABOUT ELECTRICAL INSTALLATION,
CONSULT A LICENSED ELECTRICIAN!
IS EI8602
2006-9-19 -
6 CORPORATE PARKWAY
GOOSE CREEK SC 29445
www quoizel com
, .
. .