Quoizel HS8604C Hollister User Manual

Quoizel Lighting

Advertising
background image

SOCKET

SOCKET COLLAR

SHADE

1. Before beginning the installation, carefully unpack and identify all parts

referring to illustration.

2 Turn the electrical power to installation point OFF at circuit breaker

3

4.

:

Use wire connectors(not supplied) connect the HOUSE GROUND to the
FIXTURE GROUND WIRE attach the HOUSE WHITE WIRE to FIXTURE

WHITE (or RIBBED SIDE) SUPPLY WIRE; connect the HOUSE BLACK

(or RED) WIRE to the FIXTURE BLACK(or SMOOTH SIDE) WIRE. Wrap

each connection with approved electrical tape.

5. Carefully tuck all wires into the WALL MOUNTED OUTLET BOX and position

the fixture over the outlet box. Align the HOLES on the edge of the
BACKPLATE with the 2 mounting holes on the folded edge of the
CROSSBAR. Use screw driver, thread the (2)MOUNTING SCREWS into the
mounting holes on the folded edge of the CROSSBAR. Hand tighten until
snug to secure the BACKPLATE.

6. Position the SHADE over the SOCKET as shown. Secure the SHADE by

threading the SOCKET COLLAR onto the SOCKET. Hand tighten until snug.

7. Install the correct bulbs referring to the fixture markings and/or labels for

maximum wattage.

8 Restore power to the installation point ON. Retain this sheet for future

reference.

.

.

( )

.

,

.

;

Place the CROSSBAR on the BACKPLATE and align the holes in the

BACKPLATE with a set of slots in the CROSSBAR. Mount the CROSSBAR
to the outlet box with (2) OUTLET BOX SCREWS (not provided).

Make the connections

INSTALLATION INSTRUCTIONS

IF IN DOUBT ABOUT ELECTRICAL INSTALLATION,

CONSULT A LICENSED ELECTRICIAN!

IS HS8604
2007-08-08

-

6 CORPORATE PARKWAY
GOOSE CREEK SC 29445
www quoizel com

,

.

.

.

SUPPLY WIRES

and GROUND WIRE

OUTLET BOX

CROSSBAR

(2)OUTLET BOX SCREW

(not supplied)

(2)MOUNTING

SCREWS

BACKPLATE

Advertising
This manual is related to the following products: