Restarting the wizard, Restarting the wizard -2 – ClearOne NetStreams DigiLinX Dealer User Manual
Page 60
DigiLinX Dealer Setup Version 2.35.00
4-2
All specifications subject to change without notification. All rights reserved. Copyright © 2008 NetStreams
Main +1 512.977-9393 / fax +1 512.977.9398 / Toll Free Technical Support +1 866-353-3496
3600 W. Parmer Lane, Suite 100; Austin, TX 7872
Restarting the Wizard
1.
From the Start Wizard prompt, select Yes.
The live DigiLinX devices on the network are shown in the list on the top right of
the DigiLinX Dealer Setup window (see Figure 4-2).
NOTE:
If the devices do not display in the right window pane, close the DigiLinX
Dealer Setup program, reopen it, then reopen the project file you saved.
Figure 4-2
Project Devices
2.
Select Continue.
The Update StreamNet Devices window displays. Wait a few seconds for devices
to be found. You are prompted to update the firmware for the attached devices (see
Figure 4-3).