Great Plains 1005NT Parts Manual - Manual (Page 123)

Revision Comments Part Description Part No. Ref.
Image No. dwg13215
S/N 1890Q+ on 705NT S/N 5354U+
on 1005NT
DEPTH STOP WELDMENT 151-080H 1.
S/N 1889Q- on 705NT S/N 5353U- on
1005NT
RPBY 151-072S 151-023H 1.
3rd rev. HHCS 5/16-18X3 3/4 GR5 802-119C 2.
2nd rev. HHCS 5/16-18X3 1/2 GR5 802-333C 2.
use existing stock; 1st rev. REPLACED BY 802-333C 16032-534P 2.
WASHER FLAT 5/16 SAE PLT 804-036C 3.
Rev. 2 is not interchangeable
w/rev. 1
STOP CLAMP PAD 151-174D 4.
1st rev. Replaced by 151-174D. CLAMP SEGMENT 51000-144 4.
1st rev. Replaced by 151-174D. CLAMP SEGMENT 51000-127 5.
Rev. 2 is not interchangeable
w/rev. 1
NUT LOCK 5/16-18 PLT 803-011C 6.
1st rev. NUT, SQUARE 5/16"-18 51000-128 6.
NUT-HEX 1/4-20 PLT 803-006C 7.
WASHER LOCK SPRING 1/4 PLT 804-006C 8.
S/N 1890Q+ on 705NT S/N 5354U+
on 1005NT Refer to "Depth Stop
Valve Assembly (810-445C)" for
breakdown.
STROKE CONTROL VALVE 810-445C 9.
S/N 1889Q- on 705NT S/N 5353U- on
1005NT Refer to "Hydraulic Shut Off
Valve (810-445C)" for breakdown.
RPBY 810-445C 810-084C 9.
36'-45' DEPTH STOP MOUNT PLATE 172-253D 10.
HHCS 1/4-20X2 1/2 GR5 802-097C 11.
S/N 1890Q+ on 705NT S/N 5354U+
on 1005NT
DEPTH STOP ASSY 151-081S 12.
S/N 1889Q- on 705NT S/N 5353U- on
1005NT
RPBY 151-081S 151-072S 12.
05/08/13 - 123 - 150-213P
Table of Contents Part Number Index
Hydraulics
Depth Stop Valve Assembly
(Applies to 1005NT, 705NT only)