Bio-Rad ChromLab™ Software - Manual (Page 216)

7 | Evaluating Results
214 | NGC Chromatography Systems and ChromLab Software
Copying a Table
You can copy a table to the clipboard and then paste it into a spreadsheet or
another type of application. The copied table appears in the application with the
following adjustments:
 The color value is copied in hexadecimal format.
 The show/hide state is copied as a Boolean value.
To copy the table to the clipboard
 Right-click the trace table and select Copy Table on the menu that appears.
The table is copied to the clipboard. You can now paste it into another
application.
Showing or Hiding Pre-Injection Data
In the Evaluation window, the injection point is defined as the x = 0 of the run. For
method runs, the injection point is taken from the method and set to the
time/volume in which the sample was injected, usually in the Sample Application
phase. For manual runs, the injection point is set to time/volume = 0. By default,
data collected before the injection point are not shown.
To show pre-injection data
 Select View > Show Pre-injection.
To hide pre-injection data
 On the View menu, clear the Show Pre-injection option.