Access gateway limitations on the brocade 8000, Figure 52, Access – Dell POWEREDGE M1000E User Manual
Page 196
168
Web Tools Administrator’s Guide
53-1001772-01
Access Gateway limitations on the Brocade 8000
12
DRAFT: BROCADE CONFIDENTIAL
4. In the Switch Explorer window, select Switch Admin. The Switch Administration window
displays (
FIGURE 52
Access Gateway Auto Rebalancing
5. Click Refresh.
6. Under the Access Gateway Mode section, do the following:
•
Select the N Port Auto Rebalancing check box to enable N_Port rebalancing.
•
Select F Port Auto Rebalancing check box to enable F_Port rebalancing.
•
Click Manual Balancing and a confirmation dialog box displays. Click Yes to change F
Port-N Port Mapping or click No to cancel the changes.
7. Click Apply to apply the changes.
Access Gateway limitations on the Brocade 8000
The following list the is a compilation of the limitations of using Access Gateway with the Brocade
8000 switch:
•
Only the Port Grouping (PG) policy is supported. When the Access Gateway mode is first
enabled, the default PG policy is enforced.