Dell POWEREDGE M1000E - Manual (Page 82)

62 Fabric OS MIB Reference
53-1002750-01
History group
3
History group
History control group
etherStatsPkts512to102
3Octets
1.3.6.1.2.1.16.1.1.1.18 Read only The total number of packets (including bad packets) received that were
between 512 and 1023 octets in length inclusive (excluding framing bits
but including FCS octets).
etherStatsPkts1024to15
18Octets
1.3.6.1.2.1.16.1.1.1.19 Read only The total number of packets (including bad packets) received that were
between 1024 and 1518 octets in length inclusive (excluding framing
bits but including FCS octets).
etherStatsOwner
1.3.6.1.2.1.16.1.1.1.20 Read-write The entity that configured this entry and is therefore using the
resources assigned to it.
etherStatsStatus
1.3.6.1.2.1.16.1.1.1.21 Read-write The status of this etherStats entry.
TABLE 19
Object and OID Access Description
TABLE 20
Object and OID Access Description
history
1.3.6.1.2.1.16.2 Not
accessible A list of parameters that set up a periodic sampling of statistics. History
is collected using the rmon collection history command.
historyControlTable
1.3.6.1.2.1.16.2.1 Not
accessible A list of history control entries.
historyControlEntry
1.3.6.1.2.1.16.2.1.1 Not
accessible A list of parameters that set up a periodic sampling of statistics.
historyControlIndex
1.3.6.1.2.1.16.2.1.1.1 Read only An index that uniquely identifies an entry in the historyControl table.
Each entry defines a set of samples at a particular interval for an
interface on the device.
historyControlDataSourc
e
1.3.6.1.2.1.16.2.1.1.2 Read-write This object identifies the source of the data for which historical data
was collected and placed in a media-specific table on behalf of this
historyControlEntry. This source can be any interface on the device.
historyControlBucketsRe
quested
1.3.6.1.2.1.16.2.1.1.3 Read-write The requested number of discrete time intervals over which data is to
be saved in the part of the media-specific table associated with this
historyControlEntry.
historyControlBucketsGr
anted
1.3.6.1.2.1.16.2.1.1.4 Read only The number of discrete sampling intervals over which data is to be
saved in the part of the media-specific table associated with this
historyControlEntry.
historyControlInterval
1.3.6.1.2.1.16.2.1.1.5 Read-write The interval in seconds over which the data is sampled for each bucket
in the part of the media-specific table associated with this
historyControlEntry. This interval can be set to any number of seconds
between 1 and 3600 (1 hour). The default value is 1800.