Dell OptiPlex 980 (Early 2010) - Manual (Page 66)

Back to Contents Page
I/O Panel
Dell™ OptiPlex™ 980 Service Manual—Small Form Factor
WARNING: Before working inside your computer, read the safety information that shipped with your
computer. For additional safety best practices information, see the Regulatory Compliance Homepage at
www.dell.com/regulatory_compliance.
Removing the I/O Panel
1. Follow the procedures in Before Working Inside Your Computer.
2. Remove the front panel .
3. Remove the hard-drive bay .
4. Remove the optical drive .
5. Remove the memory .
6. Disconnect the I/O panel cable from the system board.