Dell OptiPlex 980 (Early 2010) - Manual (Page 76)

Back to Contents Page
System Board
Dell™ OptiPlex™ 980 Service Manual—Small Form Factor
WARNING: Before working inside your computer, read the safety information that shipped with your
computer. For additional safety best practices information, see the Regulatory Compliance Homepage at
www.dell.com/regulatory_compliance.
Removing the System Board
1. Follow the procedures in Before Working Inside Your Computer .
2. Remove the optical drive .
3. Remove the hard-drive bay .
4. Remove the heat sink and processor .
5. Remove the wireless module .
6. Remove the memory .
7. Remove the expansion card .
8. Disconnect all the cables from the system board.