SONiVOX Eighty Eight Ensemble - Manual (Page 18)

18
Automation
Many of Eighty Eight's parameters can be automated inside your DAW. This section has a few
tips about automating those parameters. If you haven't used automation in your tracks before,
though, consult your DAW's reference manual for specific instructions on automating plug-in
parameters.
When automating parameters, select the desired parameter from the list of Eighty Eight's
automation parameters and either draw the automation in with your mouse or use a hardware
controller to record it. When you start playback, you will see the parameters change in the
interface in real time.
You can automate the following parameters:
EQ Low Level Layer Limiter Gain Tune
EQ Lo-Mid Level Solo Limiter Threshold Transpose
EQ Hi-Mid Level Bass Modulation Wheel Volume
EQ High Level Pedal Pitch Bend Wheel Pan
Level Release All Reverb Parameters
Tip: If you have a hardware controller that sends MIDI continuous control (CC) messages, you
can assign them to control your effects' parameters in real time. Simply assign these knobs to a
CC, and record automation as you would any other parameter. (See the MIDI Learn section for
more information.) It's common to use a combination of recording and drawing the automation
in your DAW to get a good feel or to edit things after you've recorded them.