SONiVOX Eighty Eight Ensemble - Manual (Page 6)

6
MIDI Learn
Learn
The MIDI Learn feature lets you to assign or "map" its controls to any hardware MIDI controller.
To do this:
1. Click the Learn button to enter Learn Mode, which lets you to assign
hardware MIDI controls to the parameters.
2. While in Learn Mode, adjust a parameter in Eighty Eight and then move a knob or slider
on your hardware MIDI controller. That knob or slider will now control that parameter.
3. Click the Learn button again to exit Learn Mode.
Remove
If you want to change or clear a MIDI assignment, you will need to "remove" it. To do that,
follow these steps:
1. Right-click the knob you wish to reassign or unlearn.
2. Select one of the two options:
• Remove Learn: Clears the hardware control
assignment for the selected parameter only.
• Remove Learn [All]: Clears the hardware control
assignments for all parameters.
You can now assign that knob to any other MIDI hardware control (described above in the
Learn section).