Sony MDS-501 - Manual (Page 19)

When programming tracks 26 to 99, press >25 once
before pressing the respective numeric buttons.
When programming tracks 100 and above, press >25
twice before the respective numeric buttons.
Example: To program the 26th track
mu ^ cxD t) cx]
/ G K
Example: To program the 100th track
l>2^ [) l>25l
1
i;;^ c)
b) When using the front panel:
You can monitor the total program time as you
enter each track number.
1 Turn the AMS dial until the track number
to be entered lights up.
3 0 3 n 0 8 s
2 Press the AMS dial or PLAY MODE.
The selected track number is programmed.
0 3 n 0 8 s
'
Repeat step 2 to enter other tracks.
Each time you enter a track, the total program time
is recalculated and displayed. You can program up
to 25 tracks.
4
Press ►' Press ► or the AMS dial.
Program play starts from the first track of the
program.
0 0 n 0 1 s
Checking the order of programmed tracks
Turn the AMS dial (or press Kd or ) while the recorder
is playing or paused. The track numbers appear in the order
they were programmed.
To erase programmed tracks
Press CLEAR while the recorder is stopped to erase the
program one track at a time starting from the end of the
program.
To stop program play
Press ■.
To cancel program play * •
Keep pressing PLAY MODE (CONTINUE) until
"PROGRAM" disappears.
To make changes to a program
• To change a track just entered:
Press CLEAR, then repeat the programming procedure
from step 2 on page 18.
• To change all tracks:
Press ■ while the recorder is stopped, then repeat the
programming procedure from step 2 on page 18.
19