Sony MDS-501 - Manual (Page 26)

Recording a Digital Source
(Continued from previous page)
3
Press • REC ( • ) .
The recorder enters recording pause.
If the recording mode is Ail REC OFF (factory
setting), "REC Ready" will alternate with the
remaining time on the disc in the display
window.
4 R E C R e a d v
0
* 4 3 w 3 3 s
^110
• If you changed the recording mode to All REC
ON, "AllREC Ready" will alternate with the
remaining time on the disc in the display
window.
n i l R E C R e a d ^ ^
•9^
0
- 6 2 « 0 9 s
If the digital input jack is unconnected, "Din
Unlock" appears in the display window.
D i n U n l o c k
. . -»fX-
»•III
If recording pause continues for more than ten
minutes, it is automatically canceled and the
recorder stops.
4 Press ► or II.
Recording pause is canceled and recording starts.
or
□D
Track number being recorded Elapsed recording time
k
t'
60« 01^
=9^
•* II * goes off.
Play the sound source (CD player, etc.) to
be recorded.
G Press ■ to stop recording.
Recording stops.
cz:
To check the remaining time on the disc
Press DISPLAY.
Pressing DISPLAY while the recorder is stopped changes the
display as follows: total recorded time, remaining time on
the disc, disc name.
Pressing DISPLAY while the recorder is recording causes the
remaining time on the disc to appear.
To pause recording
Press I I .
Press ^ or
II again to restart recording.
Whenever recording is paused, the track number increases
by one. For example, if you paused recording while
recording the 4th track, recording continues on the 5th track
when restarted.
26